Hydrochloric Acid 37% AR – 2,5l

R280.00 Excl VAT

Cas Number. 7647-01-0

Formula: HCL

Synonyms:

  • Muriatic Acid
  • Spirits of Salt

Availability: 4 in stock (can be backordered)

SKU: CHE-H5-2 Category:

Hydrochloric Acid 37% AR – Identification of Product
Chemical Code: CHE-H9
Chemical Name: Hydrochloric Acid 37%
Chemical Grade: AR
Chemical Formula: HCl
Chemical Weight: 36,46 g/mol
CAS No: 7647-01-0
Chemical Synonyms: Hydrogen Chloride, Muriatic Acid.

Hydrochloric Acid 37% AR – Hazards Identification
REACH No: 01-2119484862-27-XXXX
Signal Word: Danger
Supplemental Hazard Information:
Additional Hazard Information: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Hydrochloric Acid 37% AR – Hazards statements
H290 – May be corrosive to metals.
H314 – Causes severe skin burns and eye damage.
H335 – May cause respiratory irritation.

Hydrochloric Acid 37% AR – Precautionary statements
P260 – Do not breathe dust/ fume/ gas/ mist/ vapours/ spray.
P280 – Wear protective gloves/ protective clothing/ eye protection/ face
protection.
P303 + P361 + P353 – IF ON SKIN (or hair): Take off immediately all contaminated clothing. Rinse skin with water/shower.
P304 + P340 + P310 – IF INHALED: Remove person to fresh air and keep comfortable for breathing. Immediately call a POISON CENTER/doctor.
P305 + P351 + P338 + P310 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Immediately call a POISON CENTER/doctor.

Hydrochloric Acid 37% AR – Composition of Chemical
Chemical Formula: HCl
EC No 1272/2008: 01-2119484862-27-XXXX

First Aid Measures
General Advice: Consult a physician. Show this safety data sheet to the doctor in attendance
If: Inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician
If: Skin Contact: Take off contaminated clothing and shoes immediately. Wash off with soap and plenty of water. Consult a physician.
If: Eye Contac: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If: Swallowed: Do NOT induce vomiting. Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Important Symptoms: The most important known symptoms and effects are described in the labeling section.
Immediate Medical Attention: No Data Available

Firefighting Measures
Extinguishing Media: Use Water spray, Alcohol-resistant foam, Dry chemical or Carbon Dioxide.
Hazards Arising: No Data Available
Advice for Firefighters: Wear self-contained breathing apparatus for firefighting if necessary
Info for Firefighting: No Data Available

Accidental Release Measures
Personal Precautions: Wear respiratory protection.
Avoid breathing vapours, mist or gas.
Ensure adequate ventilation.
Evacuate personnel to safe areas.
Enviromental Precautions: Do not let product enter drains
Method for Containment: Soak up with inert absorbent material and dispose of as hazardous waste.
Keep in suitable, closed containers for disposal.

Handling and Storage
Personal Precautions: Avoid contact with skin and eyes.
Avoid inhalation of vapour or mist.
Enviromental Precautions: Store in cool place.
Keep container tightly closed in a dry and well-ventilated place.
Containers which are opened must be carefully resealed and kept upright to prevent leakage.
Exposure Controls | Personal Protection
Derived No Effect Level (DNEL)
Workers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Consumers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Predicted No Effect Concentration (PNEC)
No Data Available
Engineering Controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Eye/Face Protection: Tightly fitting safety goggles. Faceshield (8-inch minimum). Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU).
Skin Protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove’s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices. Wash and dry hands. The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Full contact –
Material: Nitrile rubber. Minimum layer thickness: 0,4 mm.
Break through time: 480 min. Material tested: Camatril®.
Splash contact –
Material: Nitrile rubber. Minimum layer thickness: 0,11 mm.
Break through time: 69 min. Material tested: Dermatril®.
Data source: KCL GmbH, D-36124. Test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Body Protection: Complete suit protecting against chemicals. The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory Protection: Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multipurpose combination type OV/AG (US) or type ABEK (EU EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Physical and Chemical Properties
Appearance: Colourless to slightly Yellowish, Clear liquid
Odour: Pungent
Odour Threshold: No Data Available
pH: No Data Available
Melting Point: -30 °C
Boiling Point: > 100 °C
Flash Point: No Data Available
Evaporation: No Data Available
Flammability: No Data Available
Upper/Lower Flammability or Explosive Limits: No Data Available
Vapour pressure: 226,636 hPa at 21,1 °C,
546,596 hPa at 37,7 °C
Vapour density: No Data Available
Relative density: 1,18 g/mL at 25 °C
Water solubility: Miscible
Partition Coefficien: No Data Available
Auto-ignition Temperature: No Data Available
Decomposition Temperature: No Data Available
Viscosity: No Data Available
Explosive properties: No Data Available
Oxidizing properties: No Data Available
Other Safety Info: No Data Available

Stability and Reactivity
Reactivity: No Data Available
Chemical Stability: Stable under recommended storage conditions
Possibility of hazardous reactions: No Data Available
Conditions to Avoid: No Data Available
Incompatible Materials: Bases, Amines, Alkali Metals, Metals, Permanganates, e.g. Potassium Permanganate, Fluorine, Metal Acetylides, Hexalithium Disilicide
Hazardous Decomposition Products: Hazardous decomposition products formed under fire conditions – Hydrogen Chloride gas.

Toxicological Information
Acute Toxicity: Inhalation –
Inhalation may provoke the following symptoms: Respiratory irritation, Cough, Difficulty in breathing, Pneumonia.
Skin Corrosion/Irritation: Rabbit –
Result: Causes burns
Serious Eye damage | Eye Irritation: Rabbit –
Result: Corrosive to eyes
Cell Mutagenicity: No Data Available
Carcinogenicity: This product is or contains a component that is not classifiable as to its carcinogenicity based on its IARC, ACGIH, NTP, or EPA classification.
IARC: 3 – Group 3: Not classifiable as to its carcinogenicity to humans.
Reproductive toxicity: No Data Available
Specific Target Organ Toxicity – Single Exposure: The substance or mixture is classified as specific target organ toxicant, single exposure, category 3 with respiratory tract irritation.
Specific Target Organ Toxicity – Repeated Exposure: The substance or mixture is not classified as specific target organ toxicant, repeated exposure.
Aspiration Hazard: No aspiration toxicity classification

Ecological Information
Ecological Toxicity: Toxicity to fish:
LC50 – Lepomis macrochirus (Bluegill) – 24,6 mg/l – 96 h.
Toxicity to daphnia and other aquatic invertebrates:
EC50 – Daphnia magna (Water flea) – 4,91 mg/l – 48 h
Ecological Persistence and degradability: No Data Available
Bioaccumulative Potential: No Data Available
Mobility in Soil: No Data Available
Results of PBT and vPvB Assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bio-accumulative (vPvB) at levels of 0.1% or higher.
Other Adverse Effect: May be harmful to aquatic organisms due to the shift of the pH.
Do not empty into drains

Disposal Considerations
Waste Treatment Methods: Product –
Offer surplus and non-recyclable solutions to a licensed disposal company.
Contaminated packaging – Dispose of as unused product.

Transport Information
UN Number: ADR/RID: 1789
IMDG: 1789
IATA: 1789
UN Shipping Hazard: ADR/RID: HYDROCHLORIC ACID
IMDG: HYDROCHLORIC ACID
IATA: Hydrochloric Acid
Transport Hazard Class: ADR/RID: 8
IMDG: 8
IATA: 8
Packaging Group: ADR/RID: II
IMDG: II
IATA: II
Enviromental Hazards: ADR/RID: no
IMDG Marine pollutant: no
IATA: no
Special Precautions: No Data Available

Regulatory Information
Safety, Health and environmental regulations: This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Chemical Safety Assessment: For this product a chemical safety assessment was not carried out.
Additional Info: RTECS: MW4025000
Inhalation of vapors may cause:
Burning sensation, Cough, Wheezing, Shortness of breath.
Spasm, Inflammation and Edema of the Larynx.
Spasm, Inflammation and Edema of the Bronchi.
Pneumonitis, Pulmonary Edema
VIEW MSDS BUTTON

VIEW sPECSHEET BUTTON

Disclaimer

The information stated above is considered to be correct, but does not claim to be inclusive and shall only be used as a guideline. The information provided by this document is confirmed by our continuous updating of knowledge and adheres to the products appropriate safety precautions. It does not represent any guarantee of the product’s
properties. RLS Chemicals and its Associates shall not be held accountable for any damage’s consequent of handling the above product.

Reviews

There are no reviews yet.

Be the first to review “Hydrochloric Acid 37% AR – 2,5l”

Your email address will not be published. Required fields are marked *

Scroll to Top
× How can I help you?