Iodine Solution – Identification of Product
Chemical Code: RLS-SOL-I03
Chemical Name: Iodine 0.05N volumetric solution according to Wijs
Chemical Grade:
Chemical Formula: No Data Available
Chemical Weight:
CAS No:
Chemical Synonyms: Iodine volumetric solution according to Wijs 0.05N,
0.05N Iodine volumetric solution according to Wijs.
Iodine Solution – Hazards Identification
REACH No: No Data Available
Signal Word: Danger
Supplemental Hazard Information:
Additional Hazard Information: Contains Acetic Acid
Hazards statements
H226 – Flammable liquid and vapour.
H314 – Causes severe skin burns and eye damage.
Iodine Solution – Precautionary statements
P210 – Keep away from heat.
P280 – Wear protective gloves/ protective clothing/ eye protection/ face protection.
P301 + P330 + P331 – IF SWALLOWED: Rinse mouth. Do NOT induce vomiting.
P305 + P351 + P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.
P308 + P310 – IF exposed or concerned: immediately call a POISON CENTER or doctor/ physician.
Iodine Solution – Composition of Chemical
Chemical Formula: No Data Available
EC No 1272/2008: No Data Available
Iodine Solution – First Aid Measures
General Advice: First aider needs to protect himself.
If: Inhaled: Fresh air. Call in physician.
If: Skin Contact: Take off immediately all contaminated clothing. Rinse skin with water/ shower. Call a physician immediately.
If: Eye Contac: Rinse out with plenty of water. Immediately call in ophthalmologist. Remove contact lenses.
If: Swallowed: Make victim drink water (two glasses at most), avoid vomiting (risk of perforation). Call a physician immediately. Do not attempt to neutralise.
Important Symptoms: Irritation and corrosion, Cough, Shortness of breath, Risk of blindness, Bronchitis, Nausea, Bloody vomiting, Circulatory collapse, Shock, Pneumonia, Risk of corneal clouding.
Immediate Medical Attention: No Data Available
Iodine Solution – Firefighting Measures
Extinguishing Media: Water, Foam, Carbon Dioxide, Dry powder.
Hazards Arising: Combustible.
Vapours are heavier than air and may spread along floors.
Forms explosive mixtures with air at elevated temperatures.
Development of hazardous combustion gases or vapours possible in the event of fire.
Fire may cause evolution of Acetic Acid vapours.
Advice for Firefighters: Stay in danger area only with self-contained breathing apparatus.
Prevent skin contact by keeping a safe distance or by wearing suitable protective clothing. Info for Firefighting: Remove container from danger zone and cool with water.
Prevent fire extinguishing water from contaminating surface water or the ground water system.
Iodine Solution – Accidental Release Measures
Personal Precautions: Do not breathe vapours, aerosols.
Avoid substance contact.
Ensure adequate ventilation.
Keep away from heat and sources of ignition.
Evacuate the danger area, observe emergency procedures, consult an expert.
Environmental Precautions: Do not let product enter drains.
Risk of explosion.
Method for Containment: Cover drains.
Collect, bind, and pump off spills.
Observe possible material restrictions.
Take up with liquid-absorbent and neutralizing material.
Dispose of properly.
Clean up affected area.
Handling and Storage
Personal Precautions: Observe label precautions.
Keep away from open flames, hot surfaces and sources of ignition.
Take precautionary measures against static discharge.
Immediately change contaminated clothing.
Apply preventive skin protection.
Wash hands and face after working with substance.
Environmental Precautions: Keep container tightly closed in a dry and well-ventilated place.
Keep away from heat and sources of ignition.
Recommended storage temperature see product label.
Exposure Controls | Personal Protection
Derived No Effect Level (DNEL)
Workers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Consumers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Predicted No Effect Concentration (PNEC)No Data Available
Engineering Controls: Technical measures and appropriate working operations should be given priority over the use of personal protective equipment.
Eye/Face Protection: Tightly fitting safety goggles
Skin Protection: Wear protective gloves gloves.
Full contact –
Glove material: Butyl-rubber. Glove thickness: 0.7 mm.
Break through time: 480 min.
Splash contact –
Glove material: Viton (R). Glove thickness: 0.70 mm
Break through time: 120 min.
The protective gloves to be used must comply with the specifications of EC Directive 89/686/EEC and the related standard EN374,
for example KCL 898 Butoject® (full contact), KCL 890 Vitoject® (splash contact).
The breakthrough times stated above were determined by KCL in laboratory tests acc. to EN374 with samples of the recommended glove types.
This recommendation applies only to the product stated in the safety data sheet supplied by us and for the designated use. When dissolving in or mixing with other substances and under conditions deviating from those stated in EN374 please contact the supplier of CE-approved gloves.
Body Protection: Flame retardant, anti-static protective clothing.
Respiratory Protection: Required when vapours/aerosols are generated.
Recommended Filter type: Filter ABEK.
Physical and Chemical Properties
Appearance: Bluish-Black aqueous liquid
Odour: Stinging
Odour Threshold: No Data Available
pH: < 1 at 20 °C
Melting Point: No Data Available
Boiling Point: No Data Available
Flash Point: 40 °C
Evaporation: No Data Available
Flammability: No Data Available
Upper/Lower Flammability or Explosive Limits: No Data Available
Vapour pressure: No Data Available Vapour density: 1.06 g/cm3 at 20 °C
Relative density: No Data Available
Water solubility: Miscible
Partition Coefficien: No Data Available
Auto-ignition Temperature: No Data Available
Decomposition Temperature: No Data Available
Viscosity: No Data Available
Explosive properties: No Data Available
Oxidizing properties: No Data Available
Other Safety Info: No Data Available
Stability and Reactivity
Reactivity: Vapor/air-mixtures are explosive at intense warming.
Chemical Stability: The product is chemically stable under standard ambient conditions (room temperature).
Possibility of hazardous reactions: Risk of explosion with: Peroxi compounds, Perchloric Acid, Fuming Sulphuric Acid, Phosphorus Halides, Hydrogen Peroxide, Chromium(VI) Oxide, Potassium Permanganate, Peroxides, Strong oxidizing agents.
Risk of ignition or formation of inflammable gases or vapours with: Iron, Zinc, Magnesium, Mild steel.
Possible formation of Hydrogen.
Violent reactions possible with: Strong alkalis, Anhydrides, Aldehydes, Alkali Hydroxides, Non-metallic Halides, Ethanolamine, Acetaldehyde, Alcohols, Halogen-Halogen compounds, Chlorosulfonic Acid, Chromosulfuric Acid, Potassium Hydroxide, Nitric Acid.
Conditions to Avoid: Heating.
Incompatible Materials: Various metals.
Hazardous Decomposition Products: No Data Available
Toxicological Information
Acute Toxicity: Acute oral toxicity –
Symptoms: Nausea, Bloody vomiting, Tissue damage.
If ingested, severe burns of the mouth and throat, as well as a danger of perforation of the oesophagus and the stomach.
Pulmonary failure possible after aspiration of vomit.
Acute inhalation toxicity:
Symptoms: Mucosal irritations, Cough, Shortness of breath.
Possible damages: Damage of respiratory tract, Pneumonia, Bronchitis.
Inhalation may lead to the formation of oedemas in the respiratory tract.
Symptoms may be delayed.
Skin Corrosion/Irritation: Mixture causes severe burns. Serious Eye damage | Eye Irritation: Mixture causes serious eye damage. Risk of corneal clouding. Risk of blindness!
Cell Mutagenicity: No Data Available
Carcinogenicity: No Data Available
Reproductive toxicity: No Data Available
Specific Target Organ Toxicity – Single Exposure: No Data Available
Specific Target Organ Toxicity – Repeated Exposure: No Data Available
Aspiration Hazard: No Data Available
Ecological Information
Ecological Toxicity: No Data Available
Ecological Persistence and degradability: No Data Available
Bio-accumulative Potential: No Data Available
Mobility in Soil: No Data Available
Results of PBT and vPvB Assessment: Substances in the mixture do not meet the criteria for PBT or vPvB according to Regulation (EC) No 1907/2006, Annex XIII, or a PBT/vPvB assessment was not conducted.
Other Adverse Effect: Harmful effect due to pH shift.
Caustic even in diluted form.
Discharge into the environment must be avoided.
Disposal Considerations
Waste Treatment Methods: Waste treatment methods:
Waste material must be disposed of in accordance with the national and local regulations. Leave chemicals in original containers.
No mixing with other waste. Handle uncleaned containers like the product itself.
Transport Information
UN Number: ADR/RID: 2789
IMDG: 2789
IATA: 2789
UN Shipping Hazard: ADR/RID: ACETIC ACID SOLUTION
IMDG: ACETIC ACID SOLUTION
IATA: ACETIC ACID SOLUTION
Passenger Aircraft: Not permitted for transport Transport Hazard Class: ADR/RID: 8 (3)
IMDG: 8 (3)
IATA: 8 (3)
Packaging Group: ADR/RID: II
IMDG: II
IATA: II
Environmental Hazards: ADR/RID: —
IMDG: —
IATA: —
Special Precautions: ADR/RID: Yes, Tunnel restriction code D/E.
IMDG: yes, EmS F-E S-C
IATA: no
Regulatory Information
Safety, Health and environmental regulations: Storage class: 3
Chemical Safety Assessment: For this product a chemical safety assessment was not carried out.
Additional Info: After absorption: Gastric spasms, Shock, Circulatory collapse, Acidosis.
Absorption may result in damage of the Kidney.
Handle in accordance with good industrial hygiene and safety practice.
Other dangerous properties can not be excluded.
Provide adequate information, instruction and training for operators.
Disclaimer
The information stated above is considered to be correct, but does not claim to be inclusive and shall only be used as a guideline. The information provided by this document is confirmed by our continuous updating of knowledge and adheres to the products appropriate safety precautions. It does not represent any guarantee of the product’s
properties. RLS Chemicals and its Associates shall not be held accountable for any damage’s consequent of handling the above product
