Tetrachloroethylene AR – 2.5l

R274.22 Incl VAT

CAS Number:127-18-4

Synonyms

  • Ethylene Tetrachloride
  • Perchloroethylene

Availability: 30 in stock (can be backordered)

SKU: CHE-T3 Category:

Tetrachloroethylene AR – Identification of Product
Chemical Code: CHE-T3
Chemical Name: Tetrachloroethylene
Chemical Grade: AR
Chemical Formula: C₂Cl₄
Chemical Weight: 165,83 g/mol
CAS No: 127-18-4
Chemical Synonyms: Perchloroethylene PCE

Tetrachloroethylene AR – Hazards Identification
REACH No: No Data Available
Signal Word: Warning
Supplemental Hazard Information:
Additional Hazard Information: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.

Tetrachloroethylene AR – Hazards statements
H315 – Causes skin irritation.
H317 – May cause an allergic skin reaction.
H319 – Causes serious eye irritation.
H336 – May cause drowsiness or dizziness.
H351 – Suspected of causing cancer.
H411 – Toxic to aquatic life with long lasting effects.

Tetrachloroethylene AR – Precautionary statements
P280 – Wear protective gloves/ protective clothing/ eye protection/ face protection.
P305 + P351 + P338 – IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing.

Tetrachloroethylene AR – Composition of Chemical
Chemical Formula: C₂Cl₄
EC No 1272/2008: No Data Available

Tetrachloroethylene AR – First Aid Measures
General Advice: Consult a physician. Show this safety data sheet to the doctor in attendance.
If: Inhaled: If breathed in, move person into fresh air. If not breathing, give artificial respiration. Consult a physician.
If: Skin Contact: Wash off with soap and plenty of water. Consult a physician.
If: Eye Contac: Rinse thoroughly with plenty of water for at least 15 minutes and consult a physician.
If: Swallowed: Never give anything by mouth to an unconscious person. Rinse mouth with water. Consult a physician.
Important Symptoms: The most important known symptoms and effects are described in the labeling section.
Immediate Medical Attention: No Data Available

Firefighting Measures
Extinguishing Media: Use personal protective equipment. Avoid breathing vapours, mist or gas. Ensure adequate ventilation.
Evacuate personnel to safe areas.
Hazards Arising: No Data Available
Advice for Firefighters: Wear self-contained breathing apparatus for firefighting if necessary.
Info for Firefighting: No Data Available

Precautionary statements
Personal Precautions: No Data Available
Enviromental Precautions: Prevent further leakage or spillage if safe to do so. Do not let product enter drains. Discharge into the environment must be avoided.
Method for Containment: Soak up with inert absorbent material and dispose of as hazardous waste. Keep in suitable, closed containers for disposal.

Handling and Storage
Personal Precautions: Avoid contact with skin and eyes. Avoid inhalation of vapour or mist.
Enviromental Precautions: Keep container tightly closed in a dry and well-ventilated place. Containers which are opened must be carefully resealed and kept upright to prevent leakage. Store in cool place.
Exposure Controls | Personal Protection
Derived No Effect Level (DNEL)
Workers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Consumers | Application Area | Exposure Routes | Health Effect | Value
No Data Available
Predicted No Effect Concentration (PNEC)
No Data Available
Engineering Controls: Handle in accordance with good industrial hygiene and safety practice. Wash hands before breaks and at the end of workday.
Eye/Face Protection: Face shield and safety glasses Use equipment for eye protection tested and approved under appropriate government standards such as NIOSH (US) or EN 166(EU)
Skin Protection: Handle with gloves. Gloves must be inspected prior to use. Use proper glove removal technique (without touching glove’s outer surface) to avoid skin contact with this product. Dispose of contaminated gloves after use in accordance with applicable laws and good laboratory practices.
Wash and dry hands.
The selected protective gloves have to satisfy the specifications of EU Directive 89/686/EEC and the standard EN 374 derived from it.
Full contact:
Material: Fluorinated rubber
Minimum layer thickness: 0,7 mm
Break through time: 480 min
Material tested:Vitoject® (KCL 890 / Size M)
Splash contact:
Material: Nitrile rubber
Minimum layer thickness: 0,2 mm
Break through time: 49 min
Material tested:Dermatril® P (KCL 743 / ASize M)
data source: KCL GmbH, D-36124 test method: EN374
If used in solution, or mixed with other substances, and under conditions which differ from EN 374, contact the supplier of the CE approved gloves. This recommendation is advisory only and must be evaluated by an industrial hygienist and safety officer familiar with the specific situation of anticipated use by our customers. It should not be construed as offering an approval for any specific use scenario.
Body Protection: Complete suit protecting against chemicals, The type of protective equipment must be selected according to the concentration and amount of the dangerous substance at the specific workplace.
Respiratory Protection: Where risk assessment shows air-purifying respirators are appropriate use a full-face respirator with multipurpose combination (US) or type ABEK (EN 14387) respirator cartridges as a backup to engineering controls. If the respirator is the sole means of protection, use a full-face supplied air respirator. Use respirators and components tested and approved under appropriate government standards such as NIOSH (US) or CEN (EU).

Physical and Chemical Properties
Appearance: Colourless liquid
Odour: Ethereal odour
Odour Threshold: No Data Available
pH: No Data Available
Melting Point: Melting point/range: -22 °C – lit.
Boiling Point: 121 °C – lit.
Flash Point: No Data Available
Evaporation: No Data Available
Flammability: No Data Available
Upper/Lower Flammability or Explosive Limits: No Data Available
Vapour pressure: 25,3 hPa at 25,0 °C 17,3 hPa at 20,0 °C
Vapour density: No Data Available
Relative density: 1,623 g/cm3 at 25 °C
Water solubility: 0,15 g/l at 25 °C
Partition Coefficien: log Pow: 2,53 at 23 °C
Auto-ignition Temperature: No Data Available
Decomposition Temperature: No Data Available
Viscosity: No Data Available
Explosive properties: No Data Available
Oxidizing properties: No Data Available
Other Safety Info: Surface tension 32,1 mN/m at 20 °C

Stability and Reactivity
Reactivity: No Data Available
Chemical Stability: Stable under recommended storage conditions.
Possibility of hazardous reactions: No Data Available
Conditions to Avoid: No Data Available
Incompatible Materials: Strong oxidizing agents, Strong bases
Hazardous Decomposition Products: No Data Available

Toxicological Information
Acute Toxicity: LD50 Oral – Rat – female – 3.385 mg/kg
(OECD Test Guideline 401)
Skin Corrosion/Irritation: Skin – Rabbit
Result: Skin irritation – 4 h
(OECD Test Guideline 404)
Serious Eye damage | Eye Irritation: Eyes – Rabbit
Result: Mild eye irritation – 24 h
Cell Mutagenicity: Hamster
Ovary
Result: negative
OECD Test Guideline 474
Mouse – male
Result: negative
Carcinogenicity: Limited evidence of carcinogenicity in animal studies.
IARC: 2A – Group 2A: Probably carcinogenic to humans (Tetrachloroethylene)
Reproductive toxicity: No Data Available
Specific Target Organ Toxicity – Single Exposure: May cause drowsiness or dizziness.
Specific Target Organ Toxicity – Repeated Exposure: No Data Available
Aspiration Hazard: No Data Available

Ecological Information
Ecological Toxicity: Toxicity to fish – flow-through test LC50 – Oncorhynchus mykiss (rainbow trout) – 5 mg/l – 96 h
Toxicity to daphnia and other aquatic invertebrates – EC50 – Daphnia magna (Water flea) – 7,50 mg/l – 48 h
Toxicity to algae static test EC50 – Skeletonema costatum – > 16 mg/l – 7 h
Ecological Persistence and degradability: Biodegradability aerobic – Exposure time 28 d
Result: 11 % – Not readily biodegradable.
(OECD Test Guideline 301C)
Bioaccumulative Potential: Bio-accumulation – Lepomis macrochirus (Bluegill) – 21 d – 0,00343 mg/l
Bio-concentration factor (BCF): 49
Mobility in Soil: No Data Available
Results of PBT and vPvB Assessment: This substance/mixture contains no components considered to be either persistent, bioaccumulative and toxic (PBT), or very persistent and very bioaccumulative (vPvB) at levels of 0.1% or higher.
Other Adverse Effect: Toxic to aquatic life with long lasting effects.

Disposal Considerations
Waste Treatment Methods: Product
Offer surplus and non-recyclable solutions to a licensed disposal company. Waste material must be disposed of in accordance with the Directive on waste 2008/98/EC as well as other national and local regulations. Leave chemicals in original containers. No mixing
with other waste. Handle uncleaned containers like the product itself.

Contaminated packaging
Dispose of as unused product.

Transport Information
UN Number: ADR/RID: 1897
IMDG: 1897
IATA: 1897
UN Shipping Hazard: ADR/RID: TETRACHLOROETHYLENE
IMDG: TETRACHLOROETHYLENE
IATA: Tetrachloroethylene
Transport Hazard Class: ADR/RID: 6.1
IMDG: 6.1
IATA: 6.1
Packaging Group: ADR/RID: III
IMDG: III
IATA: III
Enviromental Hazards: ADR/RID: yes
IMDG Marine pollutant: yes
IATA: no
Special Precautions: No Data Available
Regulatory Information
Safety, Health and environmental regulations: This safety datasheet complies with the requirements of Regulation (EC) No. 1907/2006.
Chemical Safety Assessment: For this product a chemical safety assessment was not carried out
Additional Info: Repeated dose toxicity – Mouse – female – Oral – LOAEL : 390 mg/kg
RTECS: KX3850000
narcosis, Liver injury may occur., Kidney injury may occur.


Disclaimer
The information stated above is considered to be correct, but does not claim to be inclusive and shall only be used as a guideline. The information provided by this document is confirmed by our continuous updating of knowledge and adheres to the products appropriate safety precautions. It does not represent any guarantee of the product’s
properties. RLS Chemicals and its Associates shall not be held accountable for any damage’s consequent of handling the above product.

Scroll to Top
× How can I help you?